Catalogue (4,150 KB)

User's Manual ( 855 KB )

Remote Software User's Manual (1,320 KB)

Excellent stabilities, high performance and low power consumption and heat emanation.
Secu-Tech's M4-400D1 4 Channel Full D1 DVR applies in its design by the specialized mobile processor developed by MOTOROLA, featuring low power consumption and high performance, as well as the embedded real time operation system (RTOS). The digital video recorder features low heat emanation and rapid starting up with system parameters and programs solidified within FLASH which never loses information during power failure.

Full D1 MPEG 4 and MPEG 4/Part 10 (H. 264) hardware compression & high video recording resolution as high as FULL D1 (704*576).
Applying enhanced MPEG 4 and MPEG 4/Part 10 (H. 264) compression technique and equipped with high-speed DSP digital processing chip as well as efficient integrated circuits for noise reduction, featuring low power consumption, rapid response, clear frame and high compression ratio. Video recording resolution can reach as high as FULL D1 (704*576).

Real Time Video/Audio recording for each channel at low HD space.
Applying the hard disk encoding compression technique for each channel of audio/video signal, SecuMaster's Full D1 DVR supports the substantial real-time (25 frames/second/channel at PAL, 30 frames/second/channel at NTSC) recording compression at low hard disk space. Recording parameter of each channel is adjustable for a good quality of replaying.

Powerful remote functions via IE Browser and TCP/IP.
Support remote real-time monitoring, playback, recording, back-up files, PTZ control and control over 24 different IP address simultaneously via IE Browser and TCP/IP.

User-friendly control interface.
Providing the embedded operating mode on control key of front panel, remote controller and joystick console which feature friendly man-machine interface. Every channel of video signal, with optional setting of stamping content with the name of camera and time displaying.

Real Time Monitoring Function

• Multiple output interfaces, e.g. video monitor, VGA display etc.
  
• Real time monitoring with 1 and 4 windows splitting.
  
• Partial disabling available for frames in prevention of unnecessary monitoring, recording or alarming.
  
• FULL D1 (704*576) resolution.
  
• Automatic identification on system of NTSC or PAL.
  
  
  Video Recording Function
  
• Applied in image compressing the invariant code stream, variable code stream frame rate and MPEG 4/Part 10 (H.264) hardware compression technique.
  
• 4 channel maximal audio/video signal on independent simultaneous real time hardware compression supported, for simultaneous audio/video recording & playback with no delay.
  
• 5 optional compression grades available for every channel of video (poor - 0.5K/frame, normal - 1.5K/frame, preferable - 2.5K/frame, fine - 3.5K/frame, best - 4.5K/frame).
  
• Real time audio monitoring for every audio signal channel.
  
  Playback Function
  
• Monitoring/video record/playback/backup simultaneously supported and multiplex mode remote access for real time recording on 4 channel video & audio while implementing single channel play, multi-channel real time monitoring, network monitoring and download of video files.
  
• Manual recording, timed recording, dynamic detection recording and multiple choices of video recording modes as well as pre-recording application.
  
• Searching modes on video recording including n accordance with channel, time, date and trigger event.
  
• Monitor frame could be snap shot for picturing as evidentiary material.
  
• Multiple recording playback mode: fast forward, slow motion, forward, backward, pause, frame by frame etc.
  
• Video recording resolution as high as FULL D1 (704*576).
  
  Storage Function
  
• 4 IDE interface built-in for total 8 hard disks without capability limit for each.
  
• The sleep mode of non-working disk is provided on the hard disk for reduction of heat generation and power consumption and the extension of its service life.
  
• Overlapping cyclic/acyclic recording available for the video recording files on the hard disk.
  
• The recording files at hard disk are also able to be downloaded on network.
  
• The files could be backed up via external USB HDD at the recorder.
  
• Support USB HDD or remote PC back-up.
  
  Alarm Function
  
• Portable sensing alarming with adjustable detection sensitivity (0-99) applied, with which as many as 192 detection areas could be exclusively set in every video channel.
  
• Video loss alarming.
  
• 8 alarming inputs to connect external alarming devices.
  
• Output of 3 channel of external witching value for interlocked alarming.
  
• The video recording process, exterior switching movement, acousto-optic alarming and electronic map switching could all be activated in linkage with alarming for targeting the camera to an assigned position.
  
• Alarm massage and related video images would be automatically sent to pre-set authorized computers during alarming.
  
• Automatic timed organizing of defense and its withdrawing.
  
  Network Function via IE Browser and TCP/IP
  
• Remote network real-time monitoring.
  
• Remote network search and playback of the files in the digital video recorder.
  
• Remote real time network recording of compressed video files.
  
• Remote network file back-up into authority preset computers.
  
• Monitor recording, remote back-up and remote control max. 24 sets of recorders simultaneously at large.
  
• Multiple computer monitoring multiple images, which represents the 8-channel video signal of different images could be sent simultaneously to 8 computers with authority in the network and be controlled respectively.
  
• Bi-directional audio/video transmission supported.
  
• Remote network control over PTZ cameras.
  
• Remote maintenance for the recorder through the remote setting/modification on parameters and software upgrading.
  
• Bi-directional phonic talk-back available via the network.
  
• Remote receiving and processing on alarming massage and checking-through of system log.
  
• Steam protocol supported (RTP/RTCP, RTSP) for direct access and control over it via network.
  
• Self-regulation on network flow: Automatically reduce the video data flow in high flow condition to ensure the normal operation of other service on the network (the flow would not be auto-reduced when alarmed).
  
• Automatic detecting and recovering of network delay.
  
• Applicable for diversified network environments.
  
• IP multicast supported.
  
• Multi-level cipher management ensuring the computer in the network could only browse certain image or video recording files in accordance with its corresponding authority.
  
  Control Function
  
• Compatible with various communication protocols on pan/tilt decoder for the control over the pan/tilt scanner.
  
• Compatible with various communication protocols on PTZ camera for the control over it.
  
• Compatible with various communication protocols on alert interface cabinet for receiving external warning massages and the control over auxiliary devices.
  
• Compatible with multiple matrix communication protocols for the control over them.
  
• Pan/tilt scanner position pre-setting and the I/O control over warning linkage.
  
• Power failure alarm and re-powered reset.
  
• Automatic screen-locking.
  
• An independent IP address of every single recorder for the control over multiple recorders via one remote controller.
  
• 8 switching values of input and 3 values of output available while the interlock between local alarming and network alarming supported.
  
• Interconnection supported to other monitoring system (e.g. those in public security, fire control, entrance guard etc.) for the implementation of interlocked intersystem warning.
  
• Data interface RS-232/422/485 and Manchester Code which support transparent network channel transmission.
  
• Connectable with accounting system of bank to save the designated recording files into the server or number them locally in accordance with corresponding customer number, date and time, currency amount, casher number, or other relevant information to facility the management and searching procedures. The number of customer drew money, customer designation and the currency amount withdrawn would also be overlapped in display in the above procedures with alarm supported on the operation against rules.
  
  Interface
  
• Interface RS-422/485, which could also act as transmission channel, for the controls over pan/tilt scanner, PTZ cameras, consoles, entrance guard controller, arrays, warning interface cabinet and other external devices.
  
• Interface RS-232 for the networking operation and image transmission via its connection with MODEM or for the system maintenance or upgrading through its connection with serial port on computers.
  
• Network interface of 10/100 Base-T for remote network access.
  
• Optional interface E1 for network remote access in 2M channel.
  
• Optional interface V.35 for network remote access in DDN channel.
  
• Optional ISDN interface for the transmission in ISDN channel.
  
• Optional XDSL interface for the transmission in XDSL channel.
  
• Optional interface 1394 for enlarging storage capability.
  
• USB interface for the backup of video recording documents.
  
  Security Management Function
  
• 3-step user management system to ensure the general users could only monitor the authorized camera or browse the authorized video recording files.
  
• Multi-grade encryption-fortification control.
  
• Establishment of users' rights and command consultation.
  
• Water-mark technology avoiding deleting or violence against images.
  
• Perfect log administration system.
  
  Display Interface
  
• Pull-down graphical user interfaces.
  
• Every channel of video signal, with optional setting of heading content and area, would be superimposed with camera name and time displaying.
  
• Real time displaying of the current operating mode of the digital video recorder.
  
• Multiple electric map for detail information displaying.
  
• Control via specialized keyboard, infrared remote-controller and panel buttons.
  
• A maximum of 64 video recorders could be controlled through the change of ID over the keyboard or remote controller.
  
  Defensive Function
  
• Alarm for power failure, and system re-startup as power resume.
  
• Auto screen-locking.
  
• RS-232/485/232 data interface, 10/100 Base-T interface, E1 interface and TVS surging-protective circuit.
  
• Protective circuits against over-current, over-voltage and short circuit at the power input end.
  
  Video
  
• Compression Standard: Enhanced MPEG 4 invariable code stream and MPEG 4/Part 10 (H.264) hardware compression.
  
• Playback Resolution: FULL D1 (704*576) ~ CIF (352*288)
  
• Real-time Monitor Resolution: 704*576
  
• Network Monitoring Resolution: FULL D1 (704*576) ~ CIF (352*288)
  
• Image Frame Rate: 25 frames per channel/second (adjustable) in PAL system 30 frames per channel/second (adjustable) in NTSC system
  
• Number of Video Recording Channels: 2/4/8/9/16 channels
  
• Number of Network Video Transmission Channels: 8 channels
  
• Network Transmission Delay: < 0.5 second
  
• Alarm Tone Pre-recording: 10 seconds
  
• Output Code Rate: 50kbps ~ 1600kbps
  
• Video Input Level: 1.0 Vp-p multiplex video signal
  
• Video Output Level: 1.0 Vp-p multiplex video signal
  
• Video Input impedance: 75 ohm
  
• Video Output Impedance: 75 ohm
  
• System: PAL, NTSC
  
  Audio
  
• Compression Standard: G.723/ADPCM, 8K sampling frequency
  
• Audio Input: Line level input
  
• Audio Output: Line level output
  
• Amount of Channels on Audio Recording: 2/4/8/9/16 channels
  
• Amount of Channels on Network Transmission: 8 channels
  
• Sampling Frequency: 8K

Connections

• Data Interface: RS-232/422/485 and Manchester Code, E1, V.35, ADSL. ISDN
  
• Communication Rate:
  RS-232: DC-256Kbps
  RS-422/485: DC-1.2 Mbps
  E1: 2Mbps, conforming the suggestion in ITU-T G703 G.704.
  V.35: NX64Kbit/s(N=1,2…….32), conforming the suggestion in ITU-T V.35/V.11
  ISDN: NX64Kbit/S (N=1~8)
  
• Network Interface: 10/100 MBase-T Adaptive Interface.
  
• Hard Disk IDE Interface: 8 Interfaces (extensible).
  
• Alarm Switching Value Input: 8 channels.
  
• Alarm Switching Value Output: 3 channels.
  
  Other
  
• Supported Protocols: TCP/IP, PPP, UDP, HTTP IP/Multicast etc.
  
• Mean Time Between Failures (MTBF): >100000 hours.
  
  Power Support
  Power: 220V+-25% 50+-2% HZ
  Power Consumption: 40W
  
  Mechanical Index
  Dimension: 430 x 100 x 440, standard 2U cabinet
  Weight: 8.15 Kgs
  
  Environmental Condition
  Operating Temperature: -10 degree C ~ 55 degree C
  Storage Temperature: -15 degree C ~ 65 degree C
  Operating Humidity: 0~95%, non-condensatio